Psychobike banner

1 - 9 of 9 Posts

·
Registered
Joined
·
161 Posts
Discussion Starter · #1 ·
I plan on running up to 300 hp on first stage and 2nd stage with 350hp. Im running the NC-2 controller. Could I pulse a second set of injectors with the nitrous controller?

I have tried big injectors and the working range sucks down low. And I leave allmotor to the 300 foot mark. So a second row of injectors would be optimal.
 

·
Registered
Joined
·
161 Posts
Discussion Starter · #3 ·
I rather use oem injectors. I had a set of aftermarket injectors but it kept breaking up.
Plus with staged injection I can get more horsepower later and not worry about changing them out.
Would pulsing the fuel injectors with the Nitrous controller work?
 

·
Registered
Joined
·
2,037 Posts
it is going to be tough to get that kind of horsepower with oem injectors. 100 shot (300hp total) is about max with stock ZX14 injectors. If I remember correctly the Gen 1 ZX14 injectors flow more than the Gen 2 but you may want to check and make sure.
 

·
Registered
Joined
·
161 Posts
Discussion Starter · #6 ·
Its an 07 zx14, so the pump and injector is up for 300hp.
But could the NC-2 pulse the injectors? Thats all I need to know.
 

·
Registered
Joined
·
161 Posts
Discussion Starter · #8 ·
I want to pulse a second set of stock injectors for the second stage. And I would like to pulse them with a nitrous controller.
 
1 - 9 of 9 Posts
Top