Psychobike banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,367 Posts
trans will bolt right in,,,,
problem is output shaft sticks out further and chain will rub frame
can have front sprocket milled for the offset
add spacers to the 4 left motors mounts,,,
both are a hassle but works
I modify trans output shaft to proper spacing
 

·
Registered
Joined
·
1,367 Posts
trans will bolt right in,,,,
problem is output shaft sticks out further and chain will rub frame
can have front sprocket milled for the offset
add spacers to the 4 left motors mounts,,,
both are a hassle but works
I modify trans output shaft to proper spacing
fogot,,,,
this is for if putting 08up tranny in a 07 down frame
 
1 - 4 of 4 Posts
Top