Psychobike banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I have a 2007 Hayabusa with a Schnitz Firestorm and a Wego III hooked up to the Firestorm. I hooked up the green TPS wire of the Wego III to the yellow wire on the Hayabusa TPS. With the bike off i get a TPS reading on the Wego III. When the bike is cranked up and running the TPS reading is lost and the bike runs rough, can not idle and then cuts off. Have anyone ever had this problem with this combination?
 

·
Registered
Joined
·
371 Posts
Do you have the tps connected to the firestorm. I would connect the wego to the firestorm and datalog that way you get way more info and its grouped together in 1 graph.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
Do you have the tps connected to the firestorm. I would connect the wego to the firestorm and datalog that way you get way more info and its grouped together in 1 graph.
Yes, everything from the wego is connected to the firestorm, tps, o2, 12 volt etc.
 
1 - 3 of 3 Posts
Top