Psychobike banner
1 - 6 of 6 Posts

· Registered
Joined
·
1,823 Posts
Grab the y/white tracer at ecu this is tps 0-5 signal voltage. If your standing behind the bike it will be on the left side of the ecu 9th pin on bottom row on big connecter. WHITE/RED tracer top row 1st pin on little connecter from right is #1 coil grag rpm signal,both of these are on the ecu thats under the tool box come back aleast 3inches from connecter as not to pull against the poles when you reconnect
 

· Registered
Joined
·
361 Posts
Discussion Starter · #3 ·
Grab the y/white tracer at ecu this is tps 0-5 signal voltage. If your standing behind the bike it will be on the left side of the ecu 9th pin on bottom row on big connecter. WHITE/RED tracer top row 1st pin on little connecter from right is #1 coil grag rpm signal,both of these are on the ecu thats under the tool box come back aleast 3inches from connecter as not to pull against the poles when you reconnect
Is that on a 08 and newer or is that 06-07 herd thay where diferent?
 

· Registered
Joined
·
361 Posts
Discussion Starter · #5 ·
Grab the y/white tracer at ecu this is tps 0-5 signal voltage. If your standing behind the bike it will be on the left side of the ecu 9th pin on bottom row on big connecter. WHITE/RED tracer top row 1st pin on little connecter from right is #1 coil grag rpm signal,both of these are on the ecu thats under the tool box come back aleast 3inches from connecter as not to pull against the poles when you reconnect
Thanks for the help thay are the same!:beer:
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top