Psychobike banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello My name is Mark:

I have a 08 GSXR 1000 drag bike project. I want to leak down test the motor this winter, and split the cases and check the bearings. What leak down tester should I buy? I had a problem with my compression tester kit the fittings are not long enough and get stuck in the spark plug hole. It is like I need some type of extended fitting that sticks out past the valve cover so I can unscrew it. can anyone help?
Thanks,
 

·
Registered
Joined
·
1 Posts
The Matco CLT2APB is the one I’ve used the longest. It’s the most reliable after hundreds of uses for me. They also sell a low pressure 30psi model. If you’re only lookin to use it once or twice then bikemaster makes one, as well as a bunch of other companies, where you could pick one up pretty cheap.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top