Psychobike banner

1 - 17 of 17 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
Bought a bunch of parts over the last year, but ended up going much bigger on the build than expected and did a brand new RCC Ultra setup, so all of the accumulated parts must go. All prices are shipped. As with all used parts, I recommend having injectors flow tested, turbo seals/bearings checked out, meth filter checked, etc before use.


Velocity Stage 2 Turbo assembly $2,000
  • GT35R ball bearing turbo
  • Velocity Header (Has slight tweaking from being bolted up)
  • Tial WasteGate
  • Freshly powder coated chargetubes
  • Silicone Couplers
  • Clamps
  • Exhaust pipe
  • dump pipe
  • Oil feed line
  • Oil return line
  • Oil return pump
  • Air filter (not pictured)












Here is a video showing the condition of the turbo. Video was filmed 12/30/2014
https://www.youtube.com/watch?v=UKZjXMmpius&feature=youtu.be




RC 650CC injectors + harness (Was used with a RCC Ultra Plenum + Microtech) $150






Microtech MT4 + harness $200






SRP Ultra Plenum + heat exchanger + hoses + water pump $1500








Dynojet LCD $100 (I believe that I have a PC3 harness for this I can include, but unsure.)


Dynojet Wideband2 $90 Needs a new O2 sensor


Hit the image limit, more items in post 2
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #2 ·
Begi FMU (Used less than 50 miles, latest design, includes 6an fittings) $125





AEM Progressive water/meth injection + filter (does not include nozzle, DOES include an aluminum tank that fits under seat on gen1 busa (not pictured))





Schnitz Cush Drive $35 New, unopened. Switched to carbon wheels




RCC heat exchanger + radiator for ultra plenum $400 Overall, fins are in good shape.






RCC heat exchanger water pump $75 (I believe this is a bosch)




"Johnny Turbo" single stage boost controller $35
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #3 ·
Here's a picture of the SRP pump for the heat exchanger / ultra plenum. Couldn't add it to the main post.

 

·
Registered
Joined
·
84 Posts
Discussion Starter · #9 ·
Cush Drive is still available, it's actually for a GEN 2 not Gen 1 as previously stated. P/N SEN002
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #10 ·
AEM Water/Meth Injection kit sold

Aluminum water/meth tank remains. $30

Looks like this (it's standing on end in the photo, has a radiator cap, 6x3x4.375 in)

 

·
Registered
Joined
·
84 Posts
Discussion Starter · #13 ·
Water tank sold

Updated Available List 12/31/2014:

Velocity Stage 2 Turbo assembly $2,000
RC 650CC injectors + harness (Was used with a RCC Ultra Plenum + Microtech) $150
Microtech MT4 + harness $200
SRP Ultra Plenum + heat exchanger + hoses + water pump $1500
Dynojet LCD $100 (I believe that I have a PC3 harness for this I can include, but unsure.)
Dynojet Wideband2 $90 Needs a new O2 sensor
Begi FMU (Used less than 50 miles, latest design, includes 6an fittings) $125
Schnitz Cush Drive $35 New, unopened. Switched to carbon wheels
RCC heat exchanger + radiator for ultra plenum $400 Overall, fins are in good shape.
RCC heat exchanger water pump $75 (I believe this is a bosch)

I'll do a package deal for the turbo kit @ $3,000 shipped:

Turbo / Header Assembly
SRP Ultra Plenum
SRP Heat Exchanger
SRP Water Pump
Begi FMU
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #15 ·
All PM's replied to.

Had a delay shipping some items to two of you, so I refunded all except $10 to cover the shipping. Please let me know when you receive the parts.


Thanks!
 
1 - 17 of 17 Posts
Top