[anwaun]

Is swapping a 06 bottom end for a 04 bottom end a direct bolt on? Which head gasket would i use 04 or 06?

 

[Dubcity]

Should be a direct bolt up. switchin heads is when you have to have the electronics to go with it. if im not mistaken you will need gasket to go with bottom end no 100% good luck

 

[pafundi]

think bore on 05 06 is .4mm bigger so prob the 06 headgasket just make sure everything else is the same

 

[anwaun]

since I'm going to a 04 bottom end then I'll need an 04 head gasket correct. Come on guys let me know exactly what i need to be done.

 

[long750]

Is swapping a 06 bottom end for a 04 bottom end a direct bolt on? Which head gasket would i use 04 or 06?

Ya i see you tryn to be sneaky!!unish:...:1laugh:

 

[anwaun]

Ya i see you tryn to be sneaky!!unish:...:1laugh:

I don't want to run across any surprises when I do my
swap but its hard to get anybody to tell you what

exactly needs to be done.

 

[Franklin]

Not many have done it an those who have are tight lipped:hysterical:

 

[Jon McGuirk]

Call a site sponsor and ask them to send you the right one. problem solved.:2thumbs: