Wanting to tune 05 gsxr 1000 on mr12 and pump gas and be able to switch between tunes on the fly, read on a forum this could be done by putting a toggle between a wire going to Ecu which seems cheaper than buying a pcv, just wondering what’s the best route and if Ecu flash is the best route I need details on how to wire in the toggle switch ms0 ms1
hi, i've done the same setup (pump / mr12) but the easy way was to put the MR12 map on the PC5. Using a map switch controller i'm able to switch when needed. I havent tried te MS0/MS01 map function on the ECU yet. Also keep in mind that would need more work when making changes to the mapping. The PC5 is much easier to work with, hook it up to your laptop and make the desired changes instantly (the additional 2nd position for a extra map is also good for testing purposes).