turbo tire clearance

[duanegsxr]

My kit does sit low like the velocity kit so when im aplying the front brake to agressivly i get a touch with turbo and tire. i have raised my bike up as far as it goes and just put the low profile front tire on it so it kind of got me nervous to go make a shake down on this. radiator is a little too snugged also. HELP

[Richie]

My kit does sit low like the velocity kit so when im aplying the front brake to agressivly i get a touch with turbo and tire. i have raised my bike up as far as it goes and just put the low profile front tire on it so it kind of got me nervous to go make a shake down on this. radiator is a little too snugged also. HELP

I've sold front tire to Velocity racing.
What size wheel and tire are you running?
I know I can help you with your problem

[duanegsxr]

I think it's a size down from stock size 17 profile is 60

[duanegsxr]

120 60 17 is what I have on now little more clearance but still cluttered

[Richie]

120 60 17 is what I have on now little more clearance but still cluttered

What brand and model 120-60-17 do you have?

[shoyass]

The radiator will eventually get a hole rubbed in it from the tire. Had the same problem on a 06. Currently running a 120/60-17 pilot on the front. Cut forks on front. Got about a little over an inch clearance on the turbo. Had to make a minor flange mod on header to push it down and back some

[duanegsxr]

Im runnin a 120/60/17 shinko. (1st thread i meant it does not sit low like the velocity kit)

[shoyass]

Can you turn the turbo around?

[Richie]

The radiator will eventually get a hole rubbed in it from the tire. Had the same problem on a 06. Currently running a 120/60-17 pilot on the front. Cut forks on front. Got about a little over an inch clearance on the turbo. Had to make a minor flange mod on header to push it down and back some

Just so you know the new michelin power pure is shorter than the pilot power

[Richie]

Im runnin a 120/60/17 shinko. (1st thread i meant it does not sit low like the velocity kit)

If i was you i would start with coming the raditator start

[shoyass]

Thanks Richie for the info

[duanegsxr]

The flange from bottom of header to the top of exhaust manifold is welded. im just gonna deal with it till i find a turbo and manifold that i really want to stick with cuz the turbo is only a t25

[shoyass]

The flange from bottom of header to the top of exhaust manifold is welded. im just gonna deal with it till i find a turbo and manifold that i really want to stick with cuz the turbo is only a t25

Gotcha

[CrewChief]

i run a 08/90 for more clearance....richie can hook you up.