05 gsxr 1000 turbo engine build

[busaboy318]

I have an 05 gsxr 1000 with a velocity racing stage one turbo.I've been running it stock for a while now but would like to run more boost like 15psi. would like to know what would have to be done to the motor to handle that much boost besides pistons,rods,valves&springs,high volume oil pump gear...im sure im missing alot but its my first turbo build any help is appreciated thanks......

[Turboguy]

What hp u shooting for? If your goin for the moon then you need a high pressure oil relief and loosen the rod bearing up a little. Then you need to file fit the rings for boost. Upper and lower studs. Good head gasket. Stock bore. Oversize exhaust valves with turbo cams. Get the tranny worked. I feel like I left something out. But that should be good for some good hp. Bigger turbo if need be.

[busaboy318]

I'm looking to make 350+ hp....

[Oz Booster]

Intercooler and good engine management

[busaboy318]

Intercooler and good engine management

what are you guys using for engine management???

[Turboguy]

Knew I forgot something. What he said. Dfi is good. Motec. Haltech. Those r what I use.

[Turboguy]

All of the above will get well over that no problem. Just get the rite turbo for the job.

[busaboy318]

What kinda power do you think I could make with this setup??

[Oz Booster]

Standalone is a good option,
i usually run a boost referenced piggyback or a fuel only secondary system,
but lately have converted my bikes to later ecu to take advantage of the ecu editor boost fuel options
whoever you get to tune your bike should have some input here as there is no point getting a system he is either unfamiliar with
or unable to use .
power is going to be directly related to the parts you fit, how well there installed , and how its tuned,
its easy to make hp with a turbo , not so easy to have it reliable ,
you say you want 350hp,then the stg 1 Velocity turbo may be a bit small ,

[pedr059]

I have a gen 2 busa ecu for you, I have converted mine and run awsome.

[Agent Orange]

Your turbo is too small.

[eab]

I have an 05 gsxr 1000 with a velocity racing stage one turbo.I've been running it stock for a while now but would like to run more boost like 15psi. would like to know what would have to be done to the motor to handle that much boost besides pistons,rods,valves&springs,high volume oil pump gear...im sure im missing alot but its my first turbo build any help is appreciated thanks......

Motor needs to be built, I have my own pistons for the 05-06, rods, oil mods, valvesprings and cam timing are the basic things that need to be done internally. You'll want to have a better forced induction system, some form of intercooling/detonation control because you know 15 psi will not be enough LOL. I'm changing my program on my bike so let me know if you are intersted in talking shop and looking for a nice induction upgrade to ultra reliable and proven 400+hp.