Auto Tune with the PCV

[KIRK_ADAMS]

Is there a way to see how much the auto tune corrected the base map after a run?? If so hoooooow...lol??

[michael mathews]

Click on the auto tune tab,the drop down will allow you to view the corrections

[maverick720]

Is there a minimum sample time for the Auto Tune function? Would one pass on the spray be enough for it to extrapolate the correct values and adjustments if you gave it a good guess/fat base map?

[Twisted Gixxer]

no one pass would not b enough time for the auto tune to correct the whole map although it will tell u small changes to b made the auto tune funtion starts working after the bike is runnin for 60sec anyway so b sure to give the bike time to warm up. Kirk in your case if u have the auto tune on your turbo bike b sure to have a good base map to strt off with and the autotune will help keep the map in check i run it on mine turbo bike and must say luv it it helps from having to get it retunned to bump the boost up a lil

[Drag1kRR]

Does the auto tune change the map when going down the track? or does it collect the information for you to change the values back in the pits on your laptop?

[Twisted Gixxer]

it collects your information and then after the run you can pull in up on a laptop and see the value in which it thinks needs to be increased or decreased and you can ither accept the change or decline them. if u buy the lcd unit it actual will datalog the whole run in real time allowing your to see individual rpm and tps locations that need to b changes instead of total values!

[maverick720]

Thats the setup I want to run. The PCV coupled with the wideband 2 and LCD-200. You would never need a dyno again. AFR in real world conditions and the ability to actually SEE what its doin to your et and mph instead of guestimating is huge. When you have this setup who needs a dyno? A custom tune for every temperature and humidity combination.

[Drag1kRR]

Do they make the PCV to fit Gen 1 Busa and older models bikes or just the latest bikes like Gen 2 Busa and K8 onward bikes?

[DA BOSS]

Do they make the PCV to fit Gen 1 Busa and older models bikes or just the latest bikes like Gen 2 Busa and K8 onward bikes?

u can get one from FUELMOTO.COM They have new pcv that r retro fitted to almost any bike. got one for a 1k 07

[DA BOSS]

i want to know if u can add a secondary fuel mod, the auto tune, lcd unit and the map selector switch? the fuel mod is for the other 4 injectors. so if i did all that would i be able to make the changes to the air/fuel ratios given by the autotune?

[Twisted Gixxer]

you can add the sfm (secondary fuel module) but when u run the autotune u cant use the map switch fuction so powercommander says i dunno havent tryed it yet i run a 09 1k pcv on my 08 1k motor and ass for the busa alll you would need is to find which bike has a 4 injector hook up and run the same style injector connector or go to autozone advance and buy injector adaptors. i do know that tha cbr 1000, zx10, 636 and tha gsxr 600/750 all run the same injector plugs i have personal swaped the pclll on all of thoughs bikes run a pclll off my 750 you just have to make custom maps you cant just go to powercommander and down load them hope this help ya