Race Machine now offers Dyno Tuning.

[Race Machine]

Race Machine now offers Dyno Tuning.

Our new 250i Dynojet can measure up to 750 hp and 758 ft/lbs of torque. It is equipped with Wideband air/fuel ratio module, Atmospheric Sensing Module, RPM Module, Load control, and extended travel for extra long bikes.

Our tuner Walter Sprout is one of the best in the business. Walter has been tuning bikes for 16 years and has tuned everything from pocket bikes to 600+hp street/Race machines and can offer a wide range of tuning from nitrous to turbo with any software.
Call us today for pricing and to schedule an appointment.

Race Machine
478-988-4313

[TunerRacer]

Any questions on your setup or tuning needs give us a call or PM us on Psychobike anytime!
W

-

[Race Machine]

Walter will have an opening on the dyno monday June 21st. If anyone is interested in getting there bike dynoed call us at the shop 478-988-4313.

[Race Machine]

%
O1111
G00 G17 G54 G40 G49 G80 G90
G71
T17 M06
G00 G90 X46.5 Y-59. S2000 M03
G43 H17 Z10.
/M8
Z2.501
G01 Z-.499 F68.472
X62.179 Y-54.673 F253.6
X58.978 Y-56.464
X58.284 Y-57.095
X57.402 Y-57.346
X57.313 Y-57.395
X57.161 Y-57.414
X47.12 Y-60.269
X39.553 Y-58.514
X37.282 Y-57.628
X35.828 Y-57.438
X31.067 Y-54.852
X30.988 Y-55.099
X30.509 Y-57.755
X30.339 Y-59.17
X30.302 Y-63.898
X30.945 Y-65.293
X35.254 Y-65.572
X37.291 Y-65.362
X37.511 Y-65.357
X37.641 Y-65.172
X40.689 Y-64.359
G02 X44.048 Y-63.12 I3.806 J-5.145
X44.514 Y-63.014 I1.647 J-6.184
G01 X44.985 Y-62.879
X45.169 Y-62.926
G02 X46.484 Y-62.953 I.526 J-6.378
G01 X48.705 Y-62.602
X50.122 Y-63.513
X52.196 Y-63.691
X54.273 Y-65.312
X57.209 Y-65.44
X58.023 Y-65.654
G00 Z10.
/M09
G91 G28 Z0.
G91 G28 Y0.
T17 M06
M30
%

[Race Machine]

Walter will have an opening on the dyno Tuesday June 22. If anyone is interested in getting there bike dynoed call us at the shop 478-988-4313.

[Race Machine]

Walter will be back in town September 8, if anyone is interested in getting there bike dynoed.
To make an appointment call the shop at 478/988/4313.

[Cycle Concepts]

%
O1111
G00 G17 G54 G40 G49 G80 G90
G71
T17 M06
G00 G90 X46.5 Y-59. S2000 M03
G43 H17 Z10.
/M8
Z2.501
G01 Z-.499 F68.472
X62.179 Y-54.673 F253.6
X58.978 Y-56.464
X58.284 Y-57.095
X57.402 Y-57.346
X57.313 Y-57.395
X57.161 Y-57.414
X47.12 Y-60.269
X39.553 Y-58.514
X37.282 Y-57.628
X35.828 Y-57.438
X31.067 Y-54.852
X30.988 Y-55.099
X30.509 Y-57.755
X30.339 Y-59.17
X30.302 Y-63.898
X30.945 Y-65.293
X35.254 Y-65.572
X37.291 Y-65.362
X37.511 Y-65.357
X37.641 Y-65.172
X40.689 Y-64.359
G02 X44.048 Y-63.12 I3.806 J-5.145
X44.514 Y-63.014 I1.647 J-6.184
G01 X44.985 Y-62.879
X45.169 Y-62.926
G02 X46.484 Y-62.953 I.526 J-6.378
G01 X48.705 Y-62.602
X50.122 Y-63.513
X52.196 Y-63.691
X54.273 Y-65.312
X57.209 Y-65.44
X58.023 Y-65.654
G00 Z10.
/M09
G91 G28 Z0.
G91 G28 Y0.
T17 M06
M30
%

what you got that cnc code up there for? that the program to some of those awesome parts you guys make down there?!!

[ADAMS PERFORMANCE]

good thing he didn't forget his % at the beginning or the program would not be recognized..

Unless it is the newer Hass with the usb drives then you can omit them..


Garron

[Race Machine]

I'm not going to tell you what that program does.
You'll have to run it to find out.

[sportbikeryder]

Hmmm...interesting new part....

[sportbikeryder]

Garron, hurry up and get on on a bike so JT can test. Might knock off a few tenths and put Adams in the 6's in PST!

[Race Machine]

Can't get anything past you guys.

[Race Machine]

We've moved the date to September 10. Walter will be here then if anyone is interested in getting there bike dynoed.
To make an appointment call the shop at 478/988/4313.

[Race Machine]

No more wait or appointments. Just call and let us know your coming. Well be ready.