toggle switch

[bmorrisgsxr]

I want to wire up my horn for my air shifter and use my pass button for my nitrous.

How would I wire the air shifter to the horn and put it on toggle switch, and how would I wire my pass button for my nitrous button, also on a toggle switch?

Any help will be appreciated

[B-RACER]

What kinda and year bike?

And i would use starter button for nos..much easier to reach and let off if you have to..you get the wire right at the starter solenoid under seat..

And you have find out if your horn adds power or a ground when button is pressed?..i posted a lil how to to a guy who asked on here not to long ago..but lmk what kinda bike and ill try to explain

[bmorrisgsxr]

Its a 06 gsxr 1000

[B-RACER]

And your running a mps kill box?

Three pole on/off/on toggle (home depot has nice ones) on your bike horn has constant hot and when the button is pressed a ground completes the circut...so a wire from the hot side of your horn(orange wire) goin to the air shifter switching valve and then to the red mps kill box wire..

The toggle has the poles..take the black wire from the horn and go to the center pole of the toggle..run on wire from another pole off the toggle back down to the horn so it still works..the other pole run a wire to the other wire on the airshifter switching valve and then to the two wires on mps box together blue and black..