gearing set-up

**mmcbryde** · 03-26-2009, 12:58 AM

i just put a set of 07 gixxer rims on my 02 busa, i didnt know the sprockets for a 1000 an a busa was different. what woud be a good setup on gearing for the front sprocket an back, for the drag strip

**slo poke** · 03-26-2009, 09:39 AM

Originally Posted by mmcbryde

i just put a set of 07 gixxer rims on my 02 busa, i didnt know the sprockets for a 1000 an a busa was different. what woud be a good setup on gearing for the front sprocket an back, for the drag strip

that depends on a few things the length of the bike and power but i have the same set up and i run 16/42 and or 16/43 63inches long

**mmcbryde** · 03-26-2009, 01:20 PM

well the h.p is 217 an im 64 inchs. i got the 16 front an 42 rear,so i should be good?

**BlackByrd** · 03-26-2009, 01:24 PM

Originally Posted by mmcbryde

well the h.p is 217 an im 64 inchs. i got the 16 front an 42 rear,so i should be good?

the 1 inch wouldnt make a difference but ya weight will...i'd go wit the 43 and focus on the tach.....2cent

**mmcbryde** · 03-31-2009, 01:55 PM

what about a 15 /42 set up

gearing set-up

This is a discussion about gearing set-up within the Suzuki Hayabusa section, where you will Some say Busa's Dominate; i just put a set of 07 gixxer rims on my 02 busa, i didnt know the sprockets for a 1000 an a busa was different. what woud be a good setup on gearing for

LinkBack

Thread Tools

Search Thread

Display

gearing set-up

Re: gearing set-up

Re: gearing set-up

Re: gearing set-up

Re: gearing set-up

Posting Permissions