hd putput shaft difference

[earbleeder]

Is there a new style hd output shaft for gen 1 busas? I swear I saw that the hd shaft needed a special nut and now the website says...uses stock nut.

[STREETDRAG]

Ape Site Says:

Countershaft Nut and Washer - Modified to fit Heavy Duty Optput Shaft

New countershaft nut and washer for use with APE heavy duty Hayabusa output shaft. This is a must as the stock nut and washer do not fit the larger shaft diameter.

[earbleeder]

OK so S hintz says uses stock nut....which one is better? ape or shintz?

[STREETDRAG]

I think on the nut deal its saying if you need a stock nut this is part #.

Ape and FBG all take and mill the inside of a stock nut out to fit over the bigger shaft.

They will alao sell you a nut and modified washer.

Robinson supplys most of the shafts that I know of to places.

OK so S hintz says uses stock nut....which one is better? ape or shintz?

[Cycle Concepts]

the billet shaft originally comes with a spacer/washer that allows the stock nut to fit without any modifications..if you don't have the spacer or dont want to run the spacer, the nut has to be modified so it will tighten properly..the thread pitch and size are all the same from the stock shaft to the billet shaft..it's the length of the snout that is "SLIGHTLY" different that requires the spacer or modification of the nut..