Really need some help

+ Reply to Thread
Results 1 to 6 of 6

Really need some help

This is a discussion about Really need some help within the Suzuki Hayabusa section, where you will Some say Busa's Dominate; I have a 2002 busa with boost by smith and PCV. The bike was running fine before I put the PCV on the bike with just the boost by smith. With the PCV installed the

  1. #1
    Moving up the Ladder
    ilcraft's Avatar
    Join Date
    Jun 2010
    Location
    St. Marys, GA
    Posts
    111
    Post Thanks / Like
    Real Name
    Ira
    Rep Power
    4
    Country: United States

    Default Really need some help

    I have a 2002 busa with boost by smith and PCV. The bike was running fine before I put the PCV on the bike with just the boost by smith. With the PCV installed the bike would break up at 9000 RPM and I called power commander and they told me to send the PCV to them and they found something wrong and sent me a new one. I just put the new one on the bike and still have the same problem. I need help or I will just run the bike with boost by smith only.

  2. Remove Advertisements
    PsychoBike.com
    Advertisements
     

  3. #2
    Moving up the Ladder
    busa4mee's Avatar
    Join Date
    Jul 2011
    Location
    wisconsin
    Posts
    417
    Post Thanks / Like
    Rep Power
    3

    Default

    Might be your software, or map. Try removing the bbs and running just pcv??

  4. #3
    VIP/DONATOR
    BLUETHUNDER has made a donation to the forum!
    BLUETHUNDER's Avatar
    Join Date
    Nov 2003
    Location
    Nash County, NC
    Posts
    457
    Post Thanks / Like
    Real Name
    Jermaine
    Rep Power
    0

    Default

    Didnt know a pc5 was for an 02.
    Jermaine
    01 Kandy Hayabusa 66"

    Lets put a smile on that face

  5. #4
    Moving up the Ladder
    ilcraft's Avatar
    Join Date
    Jun 2010
    Location
    St. Marys, GA
    Posts
    111
    Post Thanks / Like
    Real Name
    Ira
    Rep Power
    4
    Country: United States

    Default

    Quote Originally Posted by BLUETHUNDER View Post
    Didnt know a pc5 was for an 02.
    They make a PCV for 02-07 Hayabusa check there website

  6. #5
    Moving up the Ladder
    06turbo13's Avatar
    Join Date
    Jul 2012
    Location
    FAR SIDE OF CRAZY
    Posts
    75
    Post Thanks / Like
    Rep Power
    2
    Country: United States

    Default

    ever take it to a dyno? might find a spot in the map
    DON'T WORRY WHAT THAT SWITCH IS FOR.... JUST DON'T YOU MAKE ME FLIP THAT SWITCH...

  7. #6
    I Finally Registered

    Join Date
    Dec 2008
    Location
    gaithersburg,md
    Posts
    4
    Post Thanks / Like
    Real Name
    shawn
    Rep Power
    0

    Default

    why do you need booth, have seen may pc usb/III/V that were just junk period but if you have ecu editor and pcv you may be giving the bike conflicting info take it to a dyno and have the afr checked at that rpm and look for a fuel problem also you may have the pc in advanced mode and only changed fuel in one cylinder or something similar , have seen this a lot, look for something simple, but i would just use ecu editor and return pcv to pay for a dyno tune or buy wego or something similar and tune it with ecu

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.