LinkBack URL
About LinkBacksclean and simple. Takes oil from the same galley as the cam chain tensioner except on the left side of the motor on the cold side of the turbo. Most manufacturers run the oil feed right next to the turbine side(HOT). These turbo engines run without oil coolers as it is and dont need the oil to be heated even more by the extreme heat coming off the turbine housing!
Think about it!
69.95
+ Reply to Thread
Results 1 to 2 of 2
turbo oil feed line set up
This is a discussion about turbo oil feed line set up within the NLR Products section, where you will
; clean and simple. Takes oil from the same galley as the cam chain tensioner except on the left side of the motor on the cold side of the turbo. Most manufacturers run the oil feed
- 09-29-2008, 12:25 PM #1Site & Midway Sponsor
- Join Date
- Dec 2001
- Location
- THE LAB
- Posts
- 1,654
- Post Thanks / Like
- Rep Power
- 12
turbo oil feed line set up
- Post Thanks / Like
s.walsh liked this post.
- 07-13-2010, 10:54 AM #2Site & Midway Sponsor
- Join Date
- Dec 2001
- Location
- THE LAB
- Posts
- 1,654
- Post Thanks / Like
- Rep Power
- 12
Re: turbo oil feed line set up
yup thats it.!!
seb
Reply With QuoteSimilar Threads
-
RED LINE
By motorbikeboy39576 in forum Upcoming Sponsored EventsReplies: 4Last Post: 11-03-2008, 07:19 PM -
D.M.E. 08/09 product line
By Busage in forum Sponsor Products & News updatesReplies: 0Last Post: 10-16-2008, 08:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.