JRI/NLR custom shocks

[NLRsystems]

NLR and JRi working together to produce the ultimate drag shock. This shock is set up using custom valving specifically for NLR. If youve seen our bikes they are extremely smooth and and utilize full movement of the shock. This translates into quick et's and ultimate traction! Every aspect of these shocks are built with precision and the drag racer in mind. They are lighter, have more rebound control, swivel fitting connection for the reservoir and offer the excellence in service. Standard JRi shocks use a 5 inch spring. The NLR variant uses a 6 inch spring!

The JRi MC/08 - Motorcycle Damper is custom designed and built specifically for the drag race market. This product is not a road race shock that has been modified to work on the drag strip. The MC/08 offers superior response time and control with JRi’s proprietary low friction bearing design and unique piston configurations. JRi’s piston design and very fine adjustment gives the perfect curve for drag strip, allowing superior launch characteristics, while maintaining grip all the way down the track.

Features of the MC/08

● 7075-T6 & 6061-T6 alloy components
● Mil-Spec hard anodize on friction surfaces
● 8 individual piston designs
● Better sealing and improved frequency response designed into pistons
● Increased nitrogen volumes for operating stability
● Floating seal and bearing assembly
● Low friction, high pressure, high temperature Teflon based primary seal
● Nitride finish on primary shaft with JRi proprietary MWS finish treatment
● All bleed paths from either side of piston are port o-ring sealed as well as continuous (non-split) piston band
● Two rebound compound tapered metering needles available in 1°, 2°, 3°, & 2°, 5°, 8° for fine tuning
● Robust reservoir design to accept progressive compression components
● NLR custom valving!!!!!!!!!!


Order your NLR/Jri shock today!!

829.00 shipped to your door!

[Chuckles05]

What make, model, and year bikes do you have available for?

[NLRsystems]

ZX14, hayabusa, GSXR1000, 750, 600

[_Wolfman_]

Would this shock work well for an extended Busa that is 75% Street/Sport Touring and 25% Track or is mainly designed and built for track only.

[ToXSicK]

Do you have a Price set for these yet Seb? I'm in the Market right Now for a Good Shock! Thanks......and Keep up the GREAT WORK SEB!

[NLRsystems]

[busadon71]

Seb I weighed my JRI shock and it weights 5lbs 5 oz compared to a stock Busa shock it weights 7lbs 12 oz and a ohlins shock that I have it weights 6 lbs 13 oz

[Wood 13]

Seb are you the only carrier of this particular shock or are there other dealers that may be may local to me in NC? Thanks.

[NLRsystems]

Im the only one with this valving set up. There are other dealers .

I can have it drop shipped to you direct from JRI!