how big of a shot

[oldman650]

how big of a shot do you guys run on your 600;s ????

[Gix86]

Depends... Are you talking a wet or a dry shot? And how much do you want to spend on the kit?

[pafundi]

Way too many variables. How long you want it to last? What bike? (I think the 636's are prob some of the tuffest) What kind of setup spraybar, fogger, wet, dry ect? What fuel you want to run? Stock motor or built? Ability to pull any timing or stock ignition timing?

Simple answer is imo keep it around a 30 shot on premium pump with a stock motor and a good tune(ie good fuel map) dont hot lap it and dont spray into the rev limiter!

[Gix86]

i already ahve a good tune. ill just be adding 7-10% fuel at 100% throttle on my map

[Big J]

take your pic


























Just joking

[maverick720]

i already ahve a good tune. ill just be adding 7-10% fuel at 100% throttle on my map

Quite a small shot you got goin there. You foggin the box or usin a spraybar or what?

[Gix86]

plan on fogging the box to see what its like. may go to spray bar later

[maverick720]

nozzles in the air ducts?

[pafundi]

hope its a small shot with only adding 7-10% on the pc3 with a dual injector bike..........

[6002abusa]

hope its a small shot with only adding 7-10% on the pc3 with a dual injector bike..........

Thats what I was thinking.

[maverick720]

Thats what i was getting at with my earlier comment. It would have to be a 10 hp or less shot if that fuel is correct.

[Gix86]

how much fuel should i be adding with a 30 shot? i was told by a few guys that run spray down here that that would be enough

[maverick720]

schnitzracing.com go to the technical corner and observe the fuel tables for nitrous. Read the fine print and multiply the numbers on the fuel table by 3 if your running a dual injector setup. Which i'm sure you are. I wouldnt listen to those local guys anymore about nitrous. They dont happen to be engine builders do they?

[Gix86]

No they aren't engine builders. Just weekend racers like myself. One guy I talked with is running spray on a R6 and he added 7% fuel I believe with his pc3 on a 30 shot. Idk about the yamaha's fuel delivery system tho so it may be different than mine. But ill def have to do a little more research before I acctually get my kit together.

[maverick720]

If you have any questions let us know. I havent been in nitrous long either, but what i found out is you really have to do your homework. Search the Nitrous/Turbo forum when you really start digging into it.