Ran a new best this weekend on my 06 gsxr 600
6.44 1/8 at 107
8.31 1000' at 119
My best 60' on the day was a 1.47
Still working on getting it dialed in before I add a bit of nitrous.
2006 GSX-R 600
Streched 8", Lowered and strapped, flashed ECU, K&N race filter, Shinko hookup, 520 chain 15/51, Drag pack clutch, Cat removed
left lane, bone stock 07 r6 engine,40 shot,62in,race gas, 160 suited
You've still got some room for improvement in that 60'. Should be consistant low 1.4s.
Yeah. Def. im teying to keep front wheel down. I thinks it picking up the back wheel in rhe 60 ft
o5 750 engine-no mods. custom promod chassis built by me. custom sidewinder, 50 shot...8.60@153,email@example.com passes were made last week at memphis international and it was 90 degress but not to humid. this bike is down to 145 psi per cyl so who knows how fast it will go in the future. re-ring thin gasket and 1k cams will help get it down too. the bike weighs 302 wet.im 158 in gear so the power to weight is about 1.6 to 1. this is what it takes to go fast.
slammed, strapped, no filter, drag hookup, 14 th front, 4 short stacks, FMF slipon, stock wheelbase
heres my times 2000 zx7r unopened motor lowered strapped air shifter lots of owner mods swb 116hp
6.54 last fri nite best yet
3 months into this deal1.63 60 ft
best 1/4 10.187 with a 1.69 60 ft time
9 second here we come hope this weekend
51 yr old man but fun old man
9.893 1/4 mile time sat at atlanta 137.74 mph
1.601 60 ft time
6.372 1/8 mile at 133 mph
2005 zx6r with 600 rr intake cam , Akro header back lowered front and rear no strap pc3 rest stock 6.78 at 105 mph . :)
Well it's not a 1/4 mile time but this past weekend I went 183.15mph in the .5 mile and 206.52 in the mile on a 06 750 with 9lbs and a 100% stock motor.
SWB turbo 06 750, 4psi (158hp)
dragbikebam here all you lil cc guys out there. this is my new version of the promod with the 05 750 engine. i did make 1 small change... an 06 1000 engine. yall know i ran an 8.60 last year on the stock motor with 50shot. well i put some new rings and thinner h/g and guess what #1 got a lil hot! so the down time has been killin me and i sold my real promod cartire chassis to buy a bike on craigs in mobile. damn thing had giles tooling and carbon fiber everything on it with 9000 miles . wrecked but totally worth the 1000 i ended up getting it for. has pc3 and pro stacks all kinds of goodies man i just lucked out. tried the grudge thing but not for me. either spinnin or flippin. put it in old trusty and holycrap! it still weighs about the same,322 now ready with all 3 bottles full. im 138 about 152 suited and im a little worried mostly around the time i hit it which is off the line, the 7s are !*#!#*scary man. i wasnt ready and need more practice but it will run a 7.40 and im never wrong on that guestamate. 243hp and the slick was freaking smokin!