03 04 cam in a 05 06 ?

[mr600]

friend told me to put a 03/04 gsxr 1000 intake cam on my 05 gsxr 1000 exhaust side. has any done or heard of this? expected results?

[pafundi]

jblankenship will be able to help you he got his sh*t flyin

[pafundi]

jblankenship posted this in another thread check out the cams listed


For 5 grand I would:

RC's 1070 nitrous pistons $650
carrillo a beams $650
stock head with hd valve springs and 03-04 1000 intake cam on the exhaust side, adj cam sprockets $400
head studs and nuts $150
new head gasket $90
Bearing set $180
Lower girdle $100
cylinder bore and replate $600
manual cam chain tensioner $50
flat oil pan $250
Slider clutch $1000
Side winder $750

total $4870

Of course that's putting it together yourself. That is my exact motor combination. It's no secret and I weigh 195 unsuited. Everyone saw me go 8.14 @ 167 at grudgement day 1 so no hiding the numbers.

Nitrous set-up is nothing more than than 2 pc3's on c16 fuel with gixx1300r spraybar, 2.5 lb bottle, nos solenoid, NO purge, nos mini, and a pressure gauge.

Chassis is internally lowered forks 3", still strapped, NO offset clamps, NO shortneck, Stock gen 1 busa shock, RC's performance flat link, 70" wheel base.

Stock gas tank, stock upper, stock fairings, +6 super sport tail, stock subframe. Stock battery in stock location also. Full cooling and charging system except cut radiator.

So no it's not hard, just how bad you want it. And this motor is very reliable.

Best of luck

[jblankenship]

yep you can use an 03-04 1000 intake cam on the exhaust side or an 01-03 750 intake cam on the exhaust side. Good for 3-4 hp. Putting the 750 cam in one right now, I also ported the head myself, and sending it out to be milled. Should pick up about 15 hp.

[mr600]

what would be better the 750 or 1k cam?

[jblankenship]

I don't think you will see a difference either way. But the 03-04 1000 cam works well with spray.

[bryanclapper]

I just an 02 1000 intake cam in my 06 1000 and a thin head gasket and it picked up 8hp, but lost a little mid range. If I was to do again, I would just leave the stk cams in it, but thats just my opinion!!

[961000srad]

hey the bike that j is talking about with the ported head and 04 750 cam in is mine. this thing hopefully will fly when were done. if ur going to spray run the 1000 cam, if motor only use the 750 cam. we know how to spray ,thats for sure. but were tring to get all motor power out of my bike. we will see. getting head milled , blakenship racing engines did the port job, new 750 valve springs, and installing 06 1000 wheels all at same time. looking for 15-20 hp. maybe 2-3 tenths with everything , we will see. see yall at vmp bike bash.

[jblankenship]

will see what it does, I just finished doing my busa head and david's 1000 head at the same time. Just sent out to be milled. We may still spray it, but we'll see. David meant an 03 750 cam.

[mr600]

price on you porting a head?

[jblankenship]

head back from milling at RC's Performance

So we should know what it does in the next couple weeks. Would be sooner, but at the hospital having second child

[1070 blue]

head back from milling at RC's Performance

So we should know what it does in the next couple weeks. Would be sooner, but at the hospital having second child

i am in the same process i change to a thinner gasket and will mill the head, do you now what the compression goes up with .015-.020 on 06 head?

[nitrouschris]

if any one is interested, i have the cams that were in my 03 1k, if some one wants them or one feel free! Sorry to thread jack but i dig budget mods and just thought id offer.


Chris

[jblankenship]

if any one is interested, i have the cams that were in my 03 1k, if some one wants them or one feel free! Sorry to thread jack but i dig budget mods and just thought id offer.


Chris

what do you want for the intake cam?

[jblankenship]

i am in the same process i change to a thinner gasket and will mill the head, do you now what the compression goes up with .015-.020 on 06 head?

we only went .012" on this head and staying with oem head gasket. It will be around .5 more compression. You will see around 1 point.