I have installed a nitrous setup on my o7 zx10. But now I am haveing some trouble getting my TPS/window box working right. The real issue I am haveing is finding the correct wire to hook into for my TPS. My main TPS has 3 wires comeing from it and i know I am looking for a wire with a rotating voltage 0 Volts at idle and around 5 volts at WOT.

I am only getting a reading on one wire and it reads 5 volts all the time no matter where the throttle is turned and of course this makes my nitrous controller think it it WOT all the time which is very bad!!! I do not get any reading off the other two wires at any time.

Has anyone wired into the TPS on a 06/07 ZX10 if so where did you find the right voltage.

Please help!