Anyone building 2008 Zx10s engines

[Kaw4life]

Macgyver, yall need to post some timeslips of what you all's 3 mill motors have accomplished at the track. I know yall grudge race but we are not asking for yall's best bike's number's. 3 mill motors on ZX-10's are the most popular build. Can you either show us some decent dyno charts and timeslips on some of the 3 mill's that Jeff has built !!!!! MAYBE it will help people that don't kow about J-N-M Motorsports get to know you all....Just a lil FYI

[macgyver]

Macgyver, yall need to post some timeslips of what you all's 3 mill motors have accomplished at the track. I know yall grudge race but we are not asking for yall's best bike's number's. 3 mill motors on ZX-10's are the most popular build. Can you either show us some decent dyno charts and timeslips on some of the 3 mill's that Jeff has built !!!!! MAYBE it will help people that don't kow about J-N-M Motorsports get to know you all....Just a lil FYI

actually there is no more jnm motorsports. i closed my place down at the end of last year. im just working on a few bikes at home now. i got tired of all the crap that goes along with owning and operating a shop.

my buddies 3mill goes 8.40s and is a fully dressed 67inch streebike. 160lb rider.

[rcrecovery]

i talked with every one about building my zx10 @ when your on a budget most of the big named shops tell you a price hum hah a lil bit about there stuff and dont remember you in 30 mins. if you are looking for unheard of customer service and some body who will help you get down the track just call JEFF (JNM) .

[jhood]

i know im no big name guy but i live at the track....and ive helped more people get down the track that other builders built their bikes than i can count. ive helped with more clutch setups and suspension questions on bikes that ive never even made a dime on. ask some of these builders to stop with their big name customers to help you with your bike if you didnt spend a fortune and see what kind of response you get.

You hit the nail dead on the head.

[2StrokeZX10R]

I have a 2008 ZX10R Carpenter head with stock cams that built 204 horse at 3800 feet elevation
Make me an offer I cant refuse or understand and I'll part with it...
Email ISRTechnology@gmail.com
352-406-0425

[blackbike]

bobs building a 2013 as we speak

[youngbloodII]

Ppretty much $3800 for head & cams will get u 25-30hp & springs are $500. U must have springs to spray safely.

[Themagma10]

Actually the 08 intake cam is not that drop in cam for the 04/05.

Kawi made a cam for the 04/05 and a different one for the 06/07.

The 08 race cam has a lift of 9.7 mm and a duration of 296 compared to stock is 292@9.7

The 06/07 race cam has a lift of 9.7mm and duration of 310 compared to stock is 300@9.1

The 04/05 race cam has a lift of 9.7 mm
and duration is 310 compared to stock is 300@ 9.1

The 04/05 cam is no longer available neither is the 06/07. You can only purchase the 08-10 intake came, which is actually better (depending on the configuration)with the increased lift and less duration
They

I dropped an 08 kit cam in my 05.. Not sure what your meaning by its not that drop in.. Are you meaning because you have to re-degree? And from what I remembered it was the same duration which was 292, but 1mm higher lift.

[Themagma10]

Ppretty much $3800 for head & cams will get u 25-30hp & springs are $500. U must have springs to spray safely.

Springs are $500?!?!?! I dunno where your seein those but I didn't pay near that for mine..

[mr.bzx7]

Carpenter spring are 160 or 180 I can't remember, i got a used set of carp springs out a blown motor for 40 bucks.

[shinobi1]

Springs are $500?!?!?! I dunno where your seein those but I didn't pay near that for mine..

Kibblewhite Spring Kits for the 10 is $500. I inquired sometime ago on the price for their springs/retainers and thats what I was quoted, so....I went another route.

[youngbloodII]

Kibblewhite Spring Kits for the 10 is $500. I inquired sometime ago on the price for their springs/retainers and thats what I was quoted, so....I went another route.

This is correct, call lee or rc's

[Born2Ride]

I paid right at $500 for my kibblewhite springs and titanium retainers last year...

[cheese334]

Hey man look all these race bikes. I have a fully dressed 08 street bike mirrors and everything 8.60's 161 2mill kaw race cams the whole deal was under $2500 Hovey Performance Dover Del. The guys name is John his a road racer he builds reliable motors.I road the bike the whole weekend at Myrtle beach and never turned it off in traffic and it never went over 227 degrees.

[cheese334]

Foot shifting !