06-12 ZX10 guys. Step Inside. (Clutch Question)

[LDD_ZX10]

How are you running your friction & steel setups? OEM fibers and steels, while still using the stock spring & spring seat (I call them spring base and conical washer, but the thin washer and curved washer that come with the OEM setup and are placed between the first and second fibers) or are you running an aftermarket friction/steel set up and eliminating these two parts?

[matzx10]

Run a first gen clutch set up with a judder plate. And get u a drag pack

[race2win]

call Dwayne at Cycle Concepts he will set you up!

[D's 636]

Run a first gen clutch set up with a judder plate. And get u a drag pack

+1... with stiffer springs and get the clutch basket welded.

[bigbusa14]

have u guys tried offsetting stock zx 14 clutch springs in there? i did it on one i put together and had great clutch use out of it ond it makes the clutch stiffer but works good for us

[mr.bzx7]

I run the stock 08-10 clutches with a welded basket, no issues what so ever

[Nerd]

I run 1st gen drag pak in my 2nd gen bike, works great.

[dang yo]

I run a hays billet basket, brocks springs/spacers and 08-10 drag pak in my 2010 zx10. Perfect street/strip setups. No problems or compliants here.

[Cycle Concepts]

Give me a call and I'll get you setup..803.285.8093